Equipment 
Infeed lines for chippers
Log intake lines for sawmills
Log sorting lines
Step feeder (Log singulator)
Mechanization of sawmills and woodworking industries
Automatic passing type press for beams Timbermatic Premere 17
Photo gallery 
Infeed lines for chippers
Log intake lines for sawmills
Log sorting lines
Step feeder (Log singulator)
Mechanization of sawmills and woodworking industries
MainContacts   
MainMainAbout the companyAbout the companyAdhesive systemsAdhesive systemsContactsContacts
Equipment

Automatic passing type press for beams Timbermatic Premere 17


Automatic glue press Premere allow to make beam with length from 6 meters and more with the width of lamellas from 80 mm to 325 mm. Press is automatically adjusted to the used lamella’s width.

Presses are equipped with automatic layup station, infeed system to press and outfeed system.

Delivery limits begin with takeoff system from the glue applicator.

Further, depending on the type of glue, lamellas are moved along the horizontal conveyor, where they can move through the infrared heating tunnel of the surface for gluing with accumulated heat.(as additional option).

Speed of passing of lamellas through the conveyor is regulated by PLC depending on glue type. From layer lamellas one by one move on board turner for lay up.

Formation of the package starts automatically so that it’s completion coincided when pressure relief.

Infeed device is a longitudinal chain conveyor with the traverses equal to width of a package. Such design in combination with a pneumatic side walls prevents displacement of lamellas in a package at loading. Formed package is feeded to the press at the same time with discharging of the ready package.

Inside the press pack moves on the drive roller conveyor with a vertical movement.

The same conveyor centers package on the horizontal axis of the cylinder.

After positioning in the press the upper clamp acts automatically, after which the main pressing force occurs.

The press can operate in one block or several blocks in length depending on the manufacturing conditions.

Feature of press is the lack of welded or bolted connections in the power circuit for ensuring stable and continuous operation without loss of accuracy.

After pressure ending, the force decreases stepwise or simultaneously, depending on the type of glue and pressing mode, herewith pressing time is regulated by the controller, which can be connected with the applicator controller for dynamic regulation of pressing time.

Package of beams is unloaded to the receiving roller conveyor adapted for connection of the lifting cross conveyor, or for work with the wheel loader.




Technical data of automatic passing type press for beams Timbermatic Premere 17


1.1 Dimensions of Package in Press

Width, maximum

1700 mm

Height, maximum

v325 mm
Length 12000 mm
   
1.2 Electricity connection
Installed power of the press
approx. 20.5 kW
Voltage 400 V 50 Hz
Control voltage 24 VDC

1.3 Overall dimensions of the press
Width, maximum 2400 mm
Height, maximum 1800 mm
Length
12000 mm
Weight 20 000 kg

1.4 Feed
Feed speed 40 m/min
Drive power 5,5 kW


1.5 Pressing
Pressing type cold
Hydraulic power 15 kW
Hydraulic pressure 175 Bar
Course of the main cylinders 300 mm
Pressing force 12 tones/m
Time of application of the total pressure
30 s

Watch video >>

News:

News archive

LLC «Timbermatic»
phone:+7 (812) 606-60-86
MainAbout the companyContactsAdhesive systems
© All rights reserved, «Timbermatic Oy», 2007
Design DanWeb.ru 2007